CPU | Celeron® プロセッサー N2820 (Atom の改良版らしい) |
メモリ | 別売 DDR3L SODIMM x 1 (1.35Vのもの) |
HDD or SDD | 別売 2.5 インチ HDD または SSD 搭載可能 |
LAN | イーサネット・ポート + 無線LAN |
その他 | ACアダプタつき |
型番 | 購入価格 | ||
本体 | Intel NUC(Next Unit of Computing) Kit Intel Celeron N2820搭載(DN2820FYK)キット BOXDN2820FYKH0 | 17980 | |
SSD | ADATA SSD 128GB 2.5インチ SATA3 6Gb/s MLC採用 3年保証 ASP600S3-128GM-C(2.5" 7mm) | 7580 | |
メモリ | DDR3 S.O.DDR3L-1600 4GB ADDS1600W4G11-R | 4630 | |
合計 | 30190 |
apache2 ffmpeg mplayer mencoder pppoe ssh sshfs lshw lm-sensors
SQUASHFS error: squashfs_read_data failed to read block完全にハングアップする。
[ 0.840672] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; probably buggy MP table ... [ 6.521303] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command [ 6.725268] xhci_hcd 0000:00:14.0: ERROR no room on ep ring [ 6.725330] xhci_hcd 0000:00:14.0: ERR: No room for command on command ring [ 6.929292] usb 1-4: device not accepting address 4, error -12入力ができなくなる。ネットワーク経由で入れる。
usb 3-1: device not accepting address 2, error -110 ehci_hcd 0000:00:1d.0: port 1 reset error -110時間がかかってこんなメッセージが表示される。USB デバイスは使えなくなる。
fast TSC calibration failed起動する前にメッセージが出て止まる。
blacklist ehci_hcd blacklist pcspkrとする。ちなみに、pcspkr (PC Speaker, PC のビープ音のためのモジュール)も引っかかったし、不必要
# cd /usr/src/ # apt-get install fakeroot kernel-package # wget -c https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.12.tar.xz # tar -xvJf linux-3.12.tar.xz # cd linux-3.12 # apt-get install libncurses5-dev # cp /boot/config-`uname -r` .config # make menuconfig # make-kpkg clean # export CONCURRENCY_LEVEL=3 # fakeroot make-kpkg --append-to-version "-customkernel" --revision "1" --initrd kernel_image kernel_headers # dpkg -i linux-image-3.12.0-customkernel_1_i386.deb linux-headers-3.12.0-customkernel_1_i386.deb→ 起動が早くなった。
# dpkg -i firmware-iwlwifi_0.41_all.deb
# modprobe iwlwifiを行えば認識すると思った。しかし、なぜか、コンパイルした kernel 3.12 で認識しない。調べてみると、カーネルのソースコードには
# cd /usr/src # wget http://www.kernel.org/pub/linux/kernel/projects/backports/stable/v3.11-rc3/backports-3.11-rc3-1.tar.bz2 # tar xjf backports-3.11-rc3-1.tar.bz2 # make defconfig-iwlwifi # make # make instal # modprobe -r iwlwifi # modprobe iwlwifiちょっと気持ち悪いけど、これで認識した。
allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid 002xxxxxxxx5 wpa-psk 3b6e......3b6e... の部分は、接続するネットワークの SSID と鍵を使って wpa_passphrase コマンドで生成する。
wpa_passphrase SSID 鍵を実行して表示された64文字のコードを用いる。
WARNING: CPU 0 PID:xxxx at drivers/gpu/drm/i915/intel_display.c:8806 ...(以下省略)...ディスプレーは接続していないので、実用上問題なさそうだけど、気になる。